Call us at 620.326.3152 for nearest Dealer Location.

 

HOME

SHIFTERS

CHASSIS PARTS

PINION MOUNTS

STEEL PINION MOUNTS

BIRDCAGES

STEEL BIRDCAGES

BIRDCAGE PARTS

PANHARD BARS

ENGINE PARTS

TOOLS

PULL BARS

     

 

(Part # 3032)

 BRAKE BRACKET

  • Fits big brakes caliper

  • Bolts to part # 3028

  • For 11-3/4" rotor

 

(Part # 3033)

 BRAKE BRACKET
  • Fits small brakes caliper
  • Bolts to part # 3028
  • Fits 11-3/4" rotor

 

  

(Part # 3038)

LOCK RING

  • Fits 3" axle tube

  • Lite weight aluminum

  • 3/4" thick

(Part # 3028)

 

 

BRAKE RING

  • Fits 3" axle tube

  • Fit brake bracket #3032 and #3033

  • 1" thick aluminum

  • Set bolt not pictured included

 
 

 

( Part # 4120)

BRAKE RING

  • Fits 3" axle tube

  • One peace design

  • 1" thick aluminum

  • Dual set bolts

  • Fits big brake bracket

 

  

 

( Part # 4141 )

BRAKE FLOATER

  • 2 Bearing brake floater

  • 1" spaced holes

  • Can lock up and run clamped

 

 

( Part # 3023

CROSS SHAFTS

  • Used for making adjustable a-arm
  • 6.0" center to center holes
  • Design for both sides of upright
  • Can be used on both sides of car

 

( Part # 3400)

ADJUSTABLE A- ARM

  • Total bind free control arm
  • Two peace design at ball joint
  • Three peace rod end design
  • Standard length available
  • Shown with ball joint cover

A-ARM

  • Replacement arms for #3400
  • One arm fits both sides

BALL JOINT COVER

  • Cover adds protection and strength to control arm
  • Made to fit standard 4 hole upper ball joint (moog #6024)

 

 

( Part # 3023-1 )

BALL JOINT COLLAR

  • Universal collar screw in ball joint
  • Used for adjustable upper control arm
  • Made from steel

 

( Part # 3023-2 )

BALL JOINT COLLAR CLEVIS

  • Used for adjustable upper control arm
  • Made from steel

 

( Part # 5000)

ALUMINUM SPINDLE

  • Fits GRT and Rockects
  • Stronger than steel
  • Replacement parts
  • Strong steering arm prevents bending

 

(Part # 3035)

 

SHOCK MOUNT

  • Fits shock brackets and 4-link bars

  • Drilled for 1/2-13 bolt

  • Also fit GRT birdcages

  • 3/4" thick

 

 

( Part # 4195-7 )

SHOCK MOUNT

  • Turn shock eye parallel with mount
  • Moves free to prevent binding
  • 6.0" and 7.0" shock drop
  • Clevis is wider than shock body to prevent gouging
  • Fits BSB and TWM birdcage

 

( 4210-9 )

GRT SHOCK MOUNT

  • Turn shock eye parallel with mount
  • Moves free to prevent binding
  • 5.0" ,6.0" and 7.0" shock drop
  • Clevis is wider than shock body to prevent gouging
  • Fits GRT birdcage

 

(Part # 4062)

 

6 TH COIL MOUNTS

  • Holds 5th and 6th coil shock

  • Mounts on 1-1/2" round tube

(Part # 4060)

6 TH COIL MOUNTS

  • Holds 5th and 6th coil shock

  • Mounts on 1" X 1-1/2" tube

 

(Part # 3056)

FRAME SLIDER

  • For mounting panhard bar

  • Arc allows movement of panhard bar without adjustment to the bar

  • 19.5" arc on short side

  • Over lapping hole

  • Made for a 2" x 2" tube

  • 1" thick aluminum

  • Comes with bushing and bolts

 

 

(Part # 3027-15)

FRAME SLIDER

  • For mounting panhard bar

  • Fits American Made Race Cars and others.

  • 1-1/2" slot 

  • Double sided on 5.0" spacing

 

(Part # 3027-20)

FRAME SLIDER

  • For mounting panhard bar

  • 2" square slot

  • Double sided on 5.0" spacing
 

(Part # 7500)

OUTLAW SLIDER

  • New state of the art bearing
  • Allows for less maintenance and more side load
  • Fully closed system
  • Double lip seal
  • Runs on oil not grease
  • Harden shaft
  • Quick release pin for fast adjustments
  • 2.0" tall cups
  • 15.0" closed 24.0" open
  • 2.0" longer shaft for 20" springs
  

 
   

(Part # 7540)

(Part # 7540-2)

XD SLIDER

  • 38MM bore allows more side load
  • Steel threaded body
  • Steel cups
  • Runs smooth as a shock but with no dampening
  • 2pc body for easy repairs
  • Harden chrome shaft
  • Low drag seal
  • 1/2 rod end on both ends
  
 

 

 

(Part # 6650)

COIL OVER KIT

  • Fits a 5.0" spring
  • Fits Bilstein,QA1 and others
  • Lynch pin in bottom for easy spring change
  • Cover plate to hold spring in place.
  • Threaded tube has scale on flat spots
  

(Part # 7070)

BEARING BRAKE FLOATER

  • One bearing design

  • Fits metric caliper

  • Bearing sizes .001,.004,.008

 

  
 

 

(Part # 7055-15)

(Part # 7055-20)

FRAME SLIDER

  • For mounting panhard bar

  • Arc allows movement of panhard bar without adjustment to the bar.

  • Made for a 2" x 2" and 1 1/2 x 1 1/2 tube

  • 3/4 thick steel

  • Comes with bushing and bolts.

 

 

 

 

( Part # 7054)

FRAME SLIDER

SINGLE SIDED

  • For mounting panhard bar

  • Arc allows movement of panhard bar without adjustment to the bar.

  • Made for a 2" x 2" and 1 1/2 x 1 1/2 tube

  • 3/4 thick steel

  • Comes with bushing and bolts.

 

  

 

(Part # 7051-15)

(Part # 7051-20)

FRAME SLIDER

  • For mounting panhard bar

  • 1 1/2" and 2" square tube

  • Double sided on 5.0" spacing

 

(Part # 7053)

AXLE MOUNT PANHARD BAR MOUNT

  • Adjust up and down with screw

  • Mounts to 3" axle

  • Adjust from 1" above c/l to 2 1/2 below

 

 

 

 

(Part # 7450)

SPRING BUCKETS

  • Clamp to axle tube for mounting spring
  • Com bearing design in cup for easy movement
  • 6.0" shock drop
  • 2.0" tall cup
  • Used on left side
 

( Part # 7451)

SPRING BUCKETS

  • For mounting spring on top of axle tube
  • Com bearing design in cup for easy movement
  • Can add or remove bucket from mount

 

  

 

(Part # 4020)

4 LINK SPACER

  • For slot 4 link bracket

  • 1/2" thick aluminum 

  • For a 5/8" bolt

 

(Part # 4021)

4 LINK SPACER

  • For slot 4 link bracket

  • 7/8" thick aluminum 

  • For a 5/8" bolt

 

 

(Part # 3026)

MOTOR MOUNTS

  • Light weight steel

  • Large bend radius produces stronger part

  • Fits small block chevys

  • Sold in sets

( Part # 3101)

 SHOCK BOLT

  • Securely bolts shock to mount

  • Uses two 3/4" wrenches

  • Long bolt for aluminum mounts

  • Short bolt for steel mounts

  • Zinc plated

  

(Part # 3100)

SHOCK PIN

  • Quick release pin for shocks

  • Made from steel and zinc plated

  • Multi drilled holes

  • Comes with clevis pin

(Part # 3200)

4-LINK PIN

  • Quick release pin for 4 link bars

  • Made from steel and zinc plated

  • Comes with clevis pin

(Click Here for Drawing)

 

(Part # 4065)

6TH COIL ASSY

  • Allows it to swivel in four directions

  • Keeps even pressure on chain

  • Smoother suspension travel

  • Comes with 600 lbs spring

  • Uses part # 4061 or 4062

(Part # 4066)

6TH COIL ASSY

Big Spring

  • Allows it to swivel in four directions

  • Keeps even pressure on chain

  • Smoother suspension travel

  • Comes with 400 lbs spring

  • Uses part # 4061 or 4062

 

  

(Part # 7066)

 6TH COIL ASSY

5" Spring

  • Allows it to swivel in four directions

  • Keeps even pressure on chain

  • Made from steel

  • Fits short 5" springs

  • Smoother suspension travel

 

  

(Part # 4068)

SMALL SPRING

  • 400 lbs spring for part # 4065

  • 600 lbs spring for part # 4065

  • 1.350" OD x 3.0" Long

(Part # 4069)

BIG SPRING

  • 400 lbs spring for part # 4066

  • 600 lbs spring for part # 4066

  • 2.5" OD x 3.0" Long

 

Some parts maybe pictured anodized for clarity.

Contact us to see if part is anodized.

BSB MFG. INC.   Phone: 620.326.3152   FAX: 620.326.3152

© Copyright 1999  BSB MFG INC. All rights reserved.
All trademarks are owned by the respective company or BSB MFG INC.