Call us at 620.326.3152 for nearest Dealer Location.

 

HOME

SHIFTERS

CHASSIS PARTS

PINION MOUNTS

STEEL PINION MOUNTS

BIRDCAGES

STEEL BIRDCAGES

BIRDCAGE PARTS

PANHARD BARS

ENGINE PARTS

TOOLS

PULL BAR

  

 

(Click to enlarge )

(Part # 7026)

1 PC STEEL BIRDCAGE

  • Includes machined nylon liners, dirt seals,   brake bracket, brake ring, shock mts and 4 link bar

  • Can float or clamp the brake.

  •  6", and 7" shock drop

  • Replacement parts sold separately

  • Sold as a kit and not painted

 

(Click to enlarge )

(Part # 7200)

2 PC STEEL BIRDCAGE

  • Allows you to clamp the shock and spring

  • Float or clamp the brake

  • Can run 2 bar or 4 bar

  • Sold in kit form and not painted

  • Some welding required

(Click to enlarge )

(Part # 7400)
SWING ARM STEEL BIRDCAGES

  • Comes complete with machined nylon liners, side washers.

  • Uses lock rings #7011

  • Comes unpainted

 

(Click to enlarge )

(Part # 7110)

XD STEEL BEARING BIRDCAGE

  • 2 Pc design, top and bottom

  • Comes with shock mounts, bushing and retainer rings

  • Lock rings allow you to clamp for 2 link

  • High alloy steel plate

  • Great to use on Hoffman Race Cars
   

 

 

 

 

(Part # 8370)

 

 XD STEEL BEARING BIRDCAGE

  • Lighter center tube design

  • No bind between bearings

  • Allows mounting to inner race of bearing

  • High alloy steel plate

  • 4 Link options for both sides

  • Comes complete with all hardware
     

 

 

( Part # )

( 7550L and 7550R)

 SHAW STEEL BEARING BIRDCAGE

  • Same pickup points as Shaws

  • Same shock drop as Shaws

  • Locates on inner race

  • Frees up car and adds drive
   

(Click to enlarge )

( Part # 7320)

 STEEL BEARING

BIRDCAGE

  • Uses two bearing

  • 2.0" wide

  • Used as 4- link, swing arm, z-link or 2- link birdcage.

  • Run with 7321or 7325 clamp bracket
   

Left side

(Click to enlarge )

(Part # 8310L)

 

2 PC STEEL BEARING BIRDCAGE

  • Can clamp the shock bkt or float it

  • Two bolts to clamp up

  • Design for left side

  • Shock mounts angled down for more clearance

  •  6", and 7" shock drop

  • Replacement parts sold separately

 
   

Right side

(Part # 8310R)

 STEEL BEARING BIRDCAGE

  • Use on right side when running 8310L

  • Floated all the time

  • Split plate design for better spring clearance

  • Locates on inner race

  • Comes complete no paint
   

 

(Part # 7100)

 STEEL BEARING

BIRDCAGE

  • Uses two bearing

  • 2.0" wide

  • Used as 4- link, swing arm, z-link or 2- link birdcage.

  • Made for over rail cars

  • Run with 7321or 7325 clamp bracket

 
   

 

 

(Part # 7580)

 SKYROCKET BEARING BIRDCAGE

  • Double sheer bracket

  • Offset shock plate

  • 6.0" shock drop

  • Shown with 7100 used on left side

  • Locates on inner race
     

 

 

 

(Part # 7330)

 2 LINK SPORT MOD

  • Used for IMCA Northern Sport Mod

  • 2 Pc ring design

  • 3 Ea 7/16 bolts to hold plate to ring

 
   

 

 

(Part # 7320-4)

 INNER RACE LOCATOR

  • Locates side ring to inner race

  • Removes side load from birdcage
   

 

 

(Part # 7550-4

 90 DEGREE SHOCK MOUNT

  • Mounts to steel birdcages

  • Allows movement of shock eye

  • Keeps from breaking eye off
   

 

 

(Part # 7325)

 CLAMP BRACKET

  • Allows to clamp shock and spring to axle tube

  • Bolts to fixed ring on axle tube
   

 

( Part # 7207)

 DROP SHOCK

  • 1 drop shock mount

  • Fits  our steel birdcages

 
   

(Click to enlarge )

(Part # 7206)

 DROP SHOCK

  • 2" drop shock mount

  • Fits  our steel birdcages
   

( Part # 7070 )

 BEARING BRAKE FLOATER

  • One bearing design

  • Fits metric caliper

  • Bearing sizes .001,.004,.008

Assy. Instructions 

1pc Billet Birdcage

2pc Steel Birdcage

7200

Click on page numbers at bottom of page.

 BSB MFG. INC.   Phone: 620.326.3152   FAX: 620.326.3152

© Copyright 1999  BSB MFG INC. All rights reserved.
All trademarks are owned by the respective company or BSB MFG INC.