HOME

SHIFTERS

CHASSIS PARTS

PINION MOUNTS

STEEL PINION MOUNTS

BIRDCAGES

STEEL BIRDCAGES

BIRDCAGE PARTS

PANHARD BARS

ENGINE PARTS

TOOLS

PULL BARS

    

 

 

(Part # 7027)

CLIMBING STEEL PINION PLATE

  • Allows to adjust J-Bar up and down without removing it.

  • Climber on one side

  • 1/2" thick

  • With steel spacer

 Click on picture

 

 

(Part # 7035)

STEEL PINION BRACKET

 

  • Over lapping holes for easy adjustment
  • 1/2" thick steel
  • Standard offset

 Click on picture

 

 

(Part # 7034)

 STEEL PINION MOUNTS

  • Reinforced on right side to 3/4 thick

  • Has center of pinion hole

  • 1/2" thick steel

  • Has lower hole

 
   

 

 

 

(Part # 7032-13)

DOUBLE SIDED STEEL PINION BRACKET

  • Drilled so plate fits both ways on pinion

  • Adjust in 1/2" increment

  • Has lower hole

  • 1/2" thick steel

  • Comes with steel bushing

 
 

 

 

 

 

(Part # 7036)

 DOUBLE SIDED PINION MOUNTS

(SCREW TYPE WITH LOWER HOLE)

  • Comes with adjuster stud, bushing and bolts

  • 3/4" thick steel

  • Added all three of our old plates together and made it stronger

  • Has lower hole

 

 

 

( Part # 7038)

 QUICK CHANGE STEEL PINION BRACKET

  • Fits quick change rear ends

  • Longer adjustments than standard plates.

  •  3/4" thick

  • With steel spacer and bolts.

 

 Click on picture

(Part # 4046)

 THREADED STUD

  • Made for adjustable pinion mounts

  • For other side of pinion bracket

 Click on picture

(Part # 4042)

 SPACER BUSHING

  • Used on part # 7030 and 7032-12

  • Made from steel

  • For 3/4" rod end

BSB MFG. INC.   Phone: 620.326.3152   FAX: 620.326.3152

© Copyright 1999  BSB MFG INC. All rights reserved.
All trademarks are owned by the respective company or BSB MFG INC.